With winter coming up, I have two options for home heating.
Central unit
- I can use the central unit and close/open vents throughout the house to heat up only the individual rooms I want. This would heat up rooms very quickly. However, to make this work, the living room with the thermostat will also need to be heated so that the thermostat reads the proper temperature. The living room is by far the largest space at about 2.5 times the size of the largest room.
Oil-filled radiator
- I can use an oil-filled radiator to heat up an individual room. This would be much slower, but I wouldn’t have to heat up the entire living room. However, the oil-filled heater might not be as efficient as the central unit. I don’t know. I plan to rarely heat up the living, no more than once per month.
Edit: The central heating unit is actually a heating kit made up of a few coils that is added to the central a/c.
Edit 2: Where I live, it might freeze once per year over night for a few hours.
Which would be more efficient on the electrical bill, and would t be considerable or negligible?
Electric radiator is 100% efficient.
If your central heating works by heating coils with electricity then it’s 100% efficient as well. If you heat all the rooms to the same temperature it makes no difference which one you use. If you use radiators but leave some rooms cooler than others then that’s going to cost less money.
If your central heating works by burning oil / gas then that’s probably going to produce heat for cheaper than electric radiators are. Same applies if it works by heat-pump. Those are 200 - 300% efficient.
Run both. Central to keep the house from freezing and radiators to make whichever room(s) comfortable.
If you’re basically living in one or two rooms in an otherwise unoccupied house then the space heater is probably better since you won’t have to deal with the thermostat being in another area.
If you’re going to need heat in different rooms all over the house then I’d say let the central heat do it’s job. You really don’t want to deal with running around opening and closing vents and having to warm up another room every time you need to go in there. It will be a pain in the ass and probably cost a lot more.
Eating a room sounds expensive. Not just in terms of the materials required, but also paying for the aftermath.
Oops! Fixed it. Thanks for pointing that out :)
Haha thanks for taking it in good spirits!
I’m curious to an actual, scientific answer, but I do something similar, and here’s my anecdotal results:
I’ve got one of those electric fireplaces (fancy 1500w space heater basically) in my den, and I usually spend a lot of time in here (it doubles as my WFH office). I’ll turn the central thermostat down about 5 degrees and just run the fireplace while I’m working in there. When I’m done, I’ll bump the main thermostat back up.
My furnace is gas, and the price keeps rising every year, but doing this over the last 3 years, my gas bill has stayed relatively flat even though the price has skyrocketed. I think it averages me an extra $20 at most on the electric bill which is less than the gas would have cost.
Granted, I live by myself, so I don’t have to worry about other people in other rooms getting chilly lol.
At least where I live gas is significantly cheaper than electric.
Complete opposite here, though both are getting expensive.
Electric price per kWh has a little more than doubled since I bought this house in late 2019. Gas has nearly tripled, and they haven’t even finished easing in the rate hikes yet (public service commission approved the gas company’s hikes, but only if they were gradually phased in).
i recommend you avoid polluting the air in an enclosed space. So no oil burning inside the room. The central heating would be a much better option in my opinion
Alternatively, weak (1 to 5 kwh) electric heaters with good placement can heat rather large rooms without wasting nearly as much power
I agree that burning oil would be a terrible idea. In this case, the oil would be in an enclosed radiator that is designed to function as an indoor heater. Thanks for looking out tho!
That is actually pretty cool! In that case, the slowness shouldn’t be a big issue. As soon as you’ve got a comfortable temperature you only need to maintain it
I think by “plugin” op means electric rafiator filled with some special oil that dissipates heat. So it’s still electric just the heating element will heat and circulate oil.
They said oil filled radiator, not oil burning. I expect it’s a very efficient electric heater like these:
If they are trying to keep one room warm and don’t care about freezing the rest of the house those are very efficient.
I was thinking of one of those radiators that burn oil, and you have to fill them up before use. Thank you for clarifying!
ps. the link appears to not work for me? Maybe they have a region block?
This is the same layout as the device I was referring to:
Oh that’s an odd approach, it’s just an electric heater with extra steps
Basically yes.
It adds some efficiency because once you have a radiator full of hot oil in the radiator it tends to release the heat for a long while after the electric is shut-off.
Most electric space heaters send a plume of hot air arcing upwards.
You end up with a nice heat storage device to radiate warmth at the level you want to use it for longer than a normal resistive space heater using the same energy.
ahh, that is handy! But I guess that’s only suitable for some types of spaces
It has its uses.
Like most bespoke items they’re good at some things, not everything.It’s nice if you’re trying to keep an indoor living space warm for a longer period, like overnight.
They typically have a thermostat setting on it to maintain the temperature.
It doesn’t make the same noise as a blowing space heater, as there’s usually not a fan. I’ve heard creaks and such from them.
As noted, the radiative effect can last for a few hours depending on energy loss in the space.
Heating just the room will be overall cheaper. However doing the whole house will be cheaper per square foot because your room isn’t insulated against other rooms, just to the outside, so you’ll lose a lot of heat to bleed through to other rooms.
Both are just converting electricity to heat which is already a very efficient process. It’s unlikely one of them is significantly better at that.
What type of central unit do you have?
It’s a central a/c unit with a heating kit added to it.
It’s probably better to use a space heater where and when you need the heat. That central heating kit is basically the same thing, but it’s using more electricity providing heat to the entire home, including the rooms you aren’t using. Just set the thermostat to a minimum temperature to keep the pipes from freezing.
Resistive heating elements are inefficient compared to heat pumps, and usually cost more to run than gas.
If it’s an old a/c system you may want to upgrade it to a heat pump. In many cases you can keep the air handler and resistive heat and only replace the outdoor unit and indoor coil.
Do you not plan on using the living room at all? Because the room you’re residing in is the one you definitely want to be warm to avoid mold.
I kind of like it being cold because I can cuddle up under a heavy blanket or wear my wizard robe.
The problem is that you increase the humidity in the room with every breath. That humidity is going to condense onto the cold walls of your living room and consequently be a breeding ground for mold.
How cold does it get where you live and which sides are the room and living room on compared to the coldest wind?
If the room you use is on the north side and the cold wind comes from the north, that electric heater is going to get a workout and you lose the advantage of the house having a heat mass that can even out the need to hwat the one room.
If the room is on the south side away from the wind the rest of the house would be a bit of a buffer, making heating only that room less of an energy simk. The number of windows and other ways to lose heat will matter too. If the living room has a lot of windows and other ways to leak heat then not heating it could be an advantage.
If it gets to freezing where you are at I would suggest a combined solution if possible. Set the central heat to a temp a bit above freezing to keep the pipes from bursting (around 55 F) and shut the ducts to rooms you don’t care about. The difference in temp to the outside temp is what uses the most energy, and closing that difference has a huge difference on energy costs. Then use the space heater in the room you do care about to reach the temp you want.
This will result in the central unit doing a lot less work than it would to bring the whole house up to temp, but the portable unit wouldn’t need to heat the the room and the interior walls nearly as much becuae it would be heating the difference between the central unit at the desired temp. This will probably be the most comfortable/consistent arrangement and likely close in cost to just doing the room by itself.
It might freeze once per year…maybe. My area is surrounded by trees, so I think wind hitting the house is negligible.
In that case, I still recommend turning on the main thermostat but setting it very low so it only kicks on during extremely low temps as this can help with comfort without much cost at all. The space heater would then do the job in the room you care about to save costs.
One other thing that I haven’t seen mentioned elsewhere and I forgot myself is humidity. While a heater isn’t going to change the humidity like an air conditioner that is cooling does, the fan in the unit can even out the humidity in the house and humidity can have a big impact on how the temp feels. Depending on the size of the room and how much air gets circulated, your presence could have a significant impact on the humidity levels.
I would recommend that whether you run the central at a low temp or not, running the fan for a bit once in a while would be a huge benefit to the home. You don’t even need to turn on the heat for that, just the blower. This will help to reduce any damage from condensation throughout the house, and you don’t need to open your room to get the benefit. Within the room you are using it might be a good idea to check the humidity levels and look up what the best humidity is for the temp you are aiming for. While that might mean getting a humidifier or dehumidifier if the room is way off, that will most likely be a lot less expensive than the heating cost and you might even find a slightly lower temp comfortable and save more than you spent on adjusting the humidity.
Great suggestions! I will definitely do them. For now, I’m guessing that I’ll prolly set the central heater at ~62*F. That will make sure it kicks on when it gets too cold and will also move the air about the house. Once I try this out, I can see if I’d like it to be set at a different temperature.
There are far too many variables to know for sure. What fuel does the central heat use? Where is the house built? What sort of sun exposure do you get? What type of house is it? What’s in your attic? Basement? How much time do you spend at home during the day?
I would go with the central heat, generally speaking.
Homes are insulated differently depending on where you live, but the exterior walls are usually better insulated than the interior ones. The heat in one room will dissipate to neighboring rooms. You’re correct that closing vents will direct the hot air to the desired rooms first. Over the course of the day, some of the energy will disperse and warm other rooms. One space heater might use less energy than your central air, but you will need to run it longer and more frequently.
You may also find that you’re keeping the one room hotter because you’re always cold in every other room. Getting warm and staying warm are two different physiological processes. Keeping the house at 66 may feel warmer than keeping one room at 72.
Consider what each heat system was built to do. Central air is there to keep the house warm. Central air is most efficient when it is automated to maintain heat. Allowing the space to get very cold every day will cause it to run longer when you feel cold.
Meanwhile, a space heater is a short-term hot spot in a room. It’s designed to create immediate warmth in the immediate area. Use it when you are feeling cold to get yourself warm, and then shut it off. If you use each one to do its job, that’s probably going to be the most efficient.
The best thing you can do for your energy bill is insulate. Get a temperature sensor, wait for a cold day, bring your entire house up to ~70, and then go hunting for cold spots. Check around window sills and near brick or masonry walls. Airflow through your walls is dollar bills flying out of your wallet. You can place film over leaking windows, replace caulk when it cracks, and fill voids that happen when old insulation breaks down or gets wet. Check your attics and crawlspaces for airflow as well, and consider reflective foil as an inexpensive upgrade if you can get to the rafters.
If everything is properly insulated, all heating and cooling becomes more efficient.
I actually did some googling and there are some okay-ish articles debating this topic. All of them said “it depends”, which isn’t really helpful.
It got me thinking, though… how much savings would you need to make it worth it to you? ($20 savings? $100 savings? $500 savings?)
The oil heater is going to cost ~$50 to purchase if you don’t already have one. That means you’ll at least need to save $50 just to break even. So over the winter, your electric bill will need to drop by $50 plus whatever the dollar amount you need in order for it to be “worth the trouble” for you.
If an extra $50 over the winter in savings ($100 total) is worth it to you, I think you have a high chance of an oil room heater getting you that savings over your central heating. I’m doubtful how much more you’d be able to save beyond that. (I didn’t do the math on it, but based on the articles I read, the oil heater is going to be cheaper in general.)
Another thing to consider: The oil heater is likely to be a lot more convenient to use than the central air option and having to close all the other vents in your house though.
upgrade your house insulation, get a heat pump on the central furnace, and heat the whole house. People have better things todo than closing vents or moving heaters., your central furnace needs most of the vents open to work right.
Just an FYI, closing up vents in an hvac can actually cause problems. It puts more strain on the fan unit, which can cause it to burn up quicker. The unit is designed to move a certain amount of air, if you restrict that air, pressure builds up in the system.
A couple closed over an entire system is fine, but closing all but one room would definitely cause problems.
I have been closing 3 out of 5. Is that too much?
Depends on the unit and whether it was over sized or under sized for the space, but restricting 60℅ air flow is a lot.
Another thing to consider is that if you later want to heat up the entire house, the unit has to work harder. Sometimes it can be more efficient to just keep the house close to your target temp.
Depends on the unit and whether it was over sized or under sized for the space, but restricting 60℅ air flow is a lot.
Thanks for your response! I appreciate it. Do you know how I can investigate this further? I would like to figure out if I’m over-stressing my unit because I’ve been doing that for the past ~2 years.
Another thing to consider is that if you later want to heat up the entire house, the unit has to work harder. Sometimes it can be more efficient to just keep the house close to your target temp.
Heating up the house happens so rarely that I can’t remember the last time I did that. It may have been ~2 years.
I’m not an HVAC technician so I wouldn’t know exactly, but I think there’s two things to consider: static pressure and duty cycle. Static pressure is the fan working hard to spin which causes wear on bearings. Duty cycle is how long the machine runs. If your duty cycle is too low then the machine is turning on and off quickly which is bad.
You could look at the size of the unit and there’s some rules of thumb that translate size, climate, and square footage of just the areas you leave the vent open and there are online calculators you can use.
I think the only way to know for sure is to measure the pressure drop across the intake and outflow and see what the fan motor is rated for.
This is a good starting point! Thank you very much
Another good way to do it is to actually hire a HVAC individual on and have them come out and just look at the system. But be wary of that. Some of them are not exactly the most brightest bulbs in the world. And they will tell you, oh you have to have them all open at the same time you can’t close them. Without actually looking at the system. I’ve run into that to myself. In my house, I can close, almost half of my vents without any issue, and yet a number of techs have told me I can’t do that. Until I make them go and look at the furnace and count the number of vents and look at the size the vents then they go oh yeah, I guess you can.
Like I said some of them are not very bright. So maybe it might pay to hire on a couple of them to really look it over. Make sure they really look at the central system, blower furnace, etc. and then also look at the vents in the size of the vents.
Yes, it cost some money upfront for them to come out and help you with it, but you can get an idea of to what they’re doing.
The other option is to go down to the library and check out a bunch of books on the subject and try to learn it yourself.
Wait until your furnace dies and see if it was closer to ten years or to 25 years?
Add up your maintenance costs over the life of the furnace and decide whether your actions could have saved enough money to change your behavior?
But seriously I’m not sure there is a clear provable answer until it happens, and even then ….
…… so for me, I tend to look at how expensive it would be to replace the furnace and decide to do everything I can to extend its life
Not really an answer to your question, but if you live somewhere that freezes think about where your pipes are.
You gotta heat the bathroom and kitchen and any other rooms that may have pipes running through them, or you’re going to freeze and probably burst some pipes.
Or, you could leave your taps trickling, but that expensive too.
Tbf some jurisdictions don’t have water bills
Yeah apartments don’t usually pay for water or heat where I live. It’s also a huge waste of water
In Northern Ireland you are just flat out… Not charged for water.
