While not hard drives, at $dayjob we bought a new server out with 16 x 64TB nvme drives. We don’t even need the speed of nvme for this machines roll. It was the density that was most appealing.
It feels crazy having a petabytes of storage (albeit with some lost to raid redundancy). Is this what it was like working in tech up till the mid 00s with significant jumps just turning up?
Absolutely not. At those densities, the write speed isn’t high enough to trust to RAID 5 or 6, particularly on a new system with drives from the same manufacturing batch (which may fail around the same time). You’d be looking at a RAID 10 or even a variant with more than two drives per mirror. Regardless of RAID level, at least a couple should be reserved as hot spares as well.
EDIT: RAID 10 doesn’t necessarily rebuild any faster than RAID 5/6, but the write speed is relevant because it determines the total time to rebuild. That determines the likelihood that another drive in the array fails (more likely during a rebuild due to added drive stress). with RAID 10, it’s less likely the drive will be in the same span. Regardless, it’s always worth restating that RAID is no substitute for your 3-2-1 backups.
That’s honestly intense. I would be terrified of having that much data in one place
While not hard drives, at $dayjob we bought a new server out with 16 x 64TB nvme drives. We don’t even need the speed of nvme for this machines roll. It was the density that was most appealing.
It feels crazy having a petabytes of storage (albeit with some lost to raid redundancy). Is this what it was like working in tech up till the mid 00s with significant jumps just turning up?
Well hell, it’s not like it’s your money.
a petabye of ssds is probably cheaper than a petabye of hdds when you account for rack costs, electricity costs, and maintenance.
Not a problem I’ve ever faced before, admittedly
This is exactly what it was like, except you didn’t need it as much.
Storage used to cover how much a person needed and maybe 2-8x more, then datasets shot upwards with audio/mp3, then video, then again with Ai.
I guess you’re expected to set those up in a RAID 5 or 6 (or similar) setup to have redundancy in case of failure.
Rebuilding after a failure would be a few days of squeaky bum time though.
At raid6, rebuilds are 4.2 roentgens, not great but they’re not horrible. Keep old backups.but the data isn’t irreplaceable.
Raid5 is suicide if you care about your data.
Absolutely not. At those densities, the write speed isn’t high enough to trust to RAID 5 or 6, particularly on a new system with drives from the same manufacturing batch (which may fail around the same time). You’d be looking at a RAID 10 or even a variant with more than two drives per mirror. Regardless of RAID level, at least a couple should be reserved as hot spares as well.
EDIT: RAID 10 doesn’t necessarily rebuild any faster than RAID 5/6, but the write speed is relevant because it determines the total time to rebuild. That determines the likelihood that another drive in the array fails (more likely during a rebuild due to added drive stress). with RAID 10, it’s less likely the drive will be in the same span. Regardless, it’s always worth restating that RAID is no substitute for your 3-2-1 backups.