Pro: 1Gb upload and download speeds on free Internet provided by the HOA. Con: As a self hoster, I have zero control over it. No port forwarding, no DMZ, no bridge mode. It’s Starbucks free WiFi with a wired connection.
Option A: Buy Google Fiber and don’t use free Internet. Option B: Create some elaborate tunnel through a VPS.
My public self hosted activities are fairly low bandwidth (password manager, SSH). I have a vague idea that I could point my domain to a low cost VPS that has a VPN tunnel into my home network for any incoming connection needs. That may require me to fill in port forwards on both systems but whatever. Tailscale is serving most of my remote needs but I still need a few ports. This does not fix the issue of online gaming port forwards (Nintendo Switch online requires a huge forwarded range for best performance) but oh well for now.
UPDATE: I think they’re using this system. https://www.cambiumnetworks.com/markets/multi-family-living/ The personal Wi-Fi overview makes it clear each AP is given it’s own VLAN which sounds a whole lot like the whole building is sharing one IP and there’s no way I’m going to get my own Internet access. They even detail how you can roam the building and maintain your WiFi connection across your neighbor’s and the common areas APs. This is the IPV4 future.
You must log in or register to comment.
If the HOA’s router supports UPnP/NAT-PMP/PCP then you might be able to use that to get some ports forwarded.
The setup is very strange. They don’t provide a router. They took the old phone lines going to each unit (which appears to have been done in Cat5 decades ago) and put an RJ-45 end on it. That plugs into a POE powered wireless access point with two more ports on it. Plugging my laptop in, the gateway does not respond to HTTP requests. The tech who installed it said I have to call the home office to change my wireless password. I got them to disable the wireless so I could put my router on the other end but I’m either running on a network that my shady small time ISP has full control over or I’m behind a double NAT. Speeds were 900+ up and down though.
I might see if I can get the AP re-enabled and let the switch connect to it directly if that even fixes the Switch’s NAT issues.
Sorry you have to deal with this. I know it wasn’t in your list of options, but you could attend HOA meetings, bring up the internet issue and see if they’ll change the current setup, or you could get elected to an HOA board and start pulling the strings of change. That’s more of a long-term goal though.
Set up a cheap VPS on DigitalOcean or the like, and run a Tailscale exit node. Put Tailscale on your devices at home (or get a 2nd router that allows you to run Tailscale on it) and join them to the same Tailnet. That’s the easiest way to accomplish this without getting too far into the weeds.
https://github.com/fatedier/frp seems to be designed for such cases, but I have not tried it myself.
I have been using it for the last 3 months to expose services from my home internet (plex, wireguard, etc.) through a VPS and I’m pretty happy with it. It’s relatively simple to set up, I haven’t had any outages so far, and it’s nice that it supports UDP port forwarding as well as TCP (for wireguard).
Yes you can do this. Two problems:
It isn’t fast. Watch your MTU.
Youll have to make sure return packets come through the VPS on their way back. You’ll have to set up those packets to masquerade on their way out, otherwise you’d see internal IPs on the internet (they get dropped immediately). You can either masquerade them on the inside so they appear to be coming from your VPS (internally), or if you want the destination computer to see the real Internet IP, you’d need to set up rules on the destinarion computer which routes packets through the VPS otherwise they’d return via the default gateway.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point HTTP Hypertext Transfer Protocol, the Web IP Internet Protocol IoT Internet of Things for device controllers NAT Network Address Translation PoE Power over Ethernet TCP Transmission Control Protocol, most often over IP UDP User Datagram Protocol, for real-time communications VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting) nginx Popular HTTP server
11 acronyms in this thread; the most compressed thread commented on today has 12 acronyms.
[Thread #843 for this sub, first seen 2nd Jul 2024, 12:15] [FAQ] [Full list] [Contact] [Source code]
It’s not self-hosted, but Tailscale funnels are also an option.
You can selfhost it on a vps with headscale
I don’t think headscale supports funnels.
True, but you can just run a reverse proxy on the VPS and not use funnels.
If they’re providing IPv6 to you, port forwarding shouldn’t be necessary most of the time for online gaming.
Are they allowing UPnP upstream?
Assuming the Switch supports ipv6, and given how backward Nintendo’s tech tends to be, it wouldn’t surprise me if they didn’t.
Although at least nintendo.com has an AAAA record.
Haven’t had to use port forwarding for gaming in like 30 or so years, so I just looked up Nintendo’s website…
Within the port range, enter the starting port and the ending port to forward. For the Nintendo Switch console, this is port 1024 through 65535
LMAO, no thanks, that’s not happening.
For your question, you could likely route everything through a tunnel and manage the port forwarding on the other end of the tunnel.
WTF? Nintendo wants you to get that wide open? 🤣
I actually gave it 44000-65535 and it’s connecting well. That’s another reason why I wanted a more robust network: IOT VLAN to segregate that risk.
Why not also remove the password from my wifi while im at it?
Relax guys. It’s a Nintendo Switch, those things never get hacked.
Tailscale, cloudflared tunnels, nebula
Headscale and zerotier as well
Option A modified: get a router, install OpenWRT, install wireguard, get a VPS, create a tunnel, profit
I’m currently running option B since I had the same issue where I was living when I built my server. I have a DigitalOcean vps and an openvpn tunnel between that and my home server, and the vps just forwards and masquerades all traffic. I’ve definitely had issues with speeds, and in the past it’s fluctuated so could’ve been an issue with something besides the vpn. It’s been a while since I’ve used it for streaming or game servers, but last I remember the speed wasn’t too bad. Playing factorio there was some noticeable latency but still playable although other games might not work as well. I’ve also done self-hosted broadcasts using owncast and that worked fine.
I’m not sure that it would fix all of your issues, but you could put some stuff behind a reverse proxy and use something like duckdns to setup dynamic dns.
A reverse proxy needs you to forward ports 80 and 443, unfortunately.
Maybe nginx does, but cloudflared does not, as far as I know (since it’s an outbound tunnel). I haven’t ever had to open any ports for cloudflared. However, it obviously requires you to use cloudflare.
A little searching seems like Cloudflare
Argotunnels might be a good route to try. And possibly free, though I’m not opposed to paying for a better service. There seems to be a fair amount of step by step documentation on this. I’ll demo this on my lab as I haven’t moved it to the new apartment yet.Yep, should be free unless you want more firewall features!
